Star Trac E-TBTe - Manual (Page 20)

21
620-7921 Rev A
Step 9.
Using a #2 Phillips head screwdriver, remove
the (4) screws that hold bottom side of the dis-
play console on, then remove the (1) screw that
holds the headphone jack cap.
Note: Retain screws for later use.
Step 10.
Next remove the bottom cover, then remove the
headphone blank cover. You will no longer
need those covers and they can be stored away
for any possible future use.
Step 11.
Using a Phillips head screwdriver, remove the
(4) screws that hold the original center console
in place, then remove the center console. You
will no longer need the center console and it can
be stored away for any possible future use. Step 12.
Insert the new center console into the front dis-
play. Using a #2 Phillips screwdriver, screw in
and secure the (4) screws that were saved from
the original center console.