Star Trac E-TBTe - Manual (Page 31)

32
620-7921 Rev A
Step 13.
Identify the cables coming out of the new center
console:
1. Center console keypad ribbon cable.
2. Center console power cable
3. Center console ground cable.
4. Seven-pin interface cable. Step 14.
Connect the center console keypad cable to J8
connector on the display board.
Step 15.
Connect the seven-pin interface cable from the
console to J14 connector on the display PC
board.
1
2 3
4
Step 16.
Take the center console power cable and attach
the male 12 pin connector to the female 12 pin
connector on the display board.