Sanyo SRT-4040DC - Manual (Page 53)

SPECIFICATIONS
Other Specifications
Operating temperature range 5°C to 40°C (41°F to 104°F)
Operating humidity range 80% or less
Power requirements (SRT-4040 only) 120V AC,60Hz
Power requirements (SRT-4040DC only) 12–24V DC
Power consumption (SRT-4040 only) 14 W
Power consumption (SRT-4040DC only) 16 W
Dimensions (W x H x D) 240 mm x 96.5 mm x 335 mm (9.45
″
x 3.8
″
x 13.19
″
)
Weight approximately 3.6 kg
Connectors (When the “TERMINAL SET” is set to “SET2”)
NOTES:
œ The terminal names and signals are different from the usual setting.
œ Names in brackets apply to terminals on the rear panel.
Clock set input (CONTROL IN) No voltage, make-contact switch input (Low input 100ms or more,
Normally 5 V)
Clock set output (CONTROL OUT) DC 5 V, 5.7k
Ω
, (Low output)
Eject input (SERIES IN) No voltage, make-contact switch input (Low input 100ms or more,
Normally 5 V)
Eject output (TIMER OUT) DC 5 V, 5.7k Ω , (Low output)
NOTE: The specifications and external appearance of this unit are subject to change without notice.
NB4QR/NA (SRT-4040 GB) Tue. Sept., 10/2002
52
English