Superimpose display – Sanyo SRT-4040DC User Manual
Page 15
SUPERIMPOSE DISPLAY
Selecting the Superimpose Display
You can select to display or not the date, time, tape
speed mode and number of alarm recordings.
1
Turn the power on to all devices used.
2
Press the MENU button to display the MAIN MENU.
3
Press the
l
(or
j
) button to select the
“2.DISPLAY/SW OUT SET” line, then press the
ENTER button.
ø
The (DISPLAY/SW OUT SET) menu appears.
DATE@@@@@@@@@@@@@Y
TIME@@@@@@@@@@@@@Y
SPEED@@@@@@@@@@@@Y
ALARM@COUNT@@@@@@Y
TIMING@@@@@@@@@@@FIELD
FIELD@@@@@@@@@@@@1
8H@MODE@@@@@@@@@@Y
4
Press the ENTER button.
5
Press the
l
(or
j
) button to select the desired
mode, then press the ENTER button.
SET UP . . . . . . . . . . . . Set each item (Individual)
ALL Y . . . . . . . . . . . . . . To set all items to “Y”
ALL N . . . . . . . . . . . . . . To set all items to “N”
ø
If using the “SET UP” setting, continue with
steps
6
to
8
.
6
Press the
l
(or
j
) button until the item to be
changed is highlighted, then press the ENTER
button.
7
Press the
l
(or
j
) button to set “Y” (displayed) or
“N” (not displayed), then press the ENTER button.
DATE . . . . . . . . . . . . . . The date appears
TIME. . . . . . . . . . . . . . . The time appears
SPEED . . . . . . . . . . . . . The recording /playback
speed mode appears
ALARM COUNT . . . . . . The number of alarm
recordings appears
8
Repeat steps
6
and
7
when setting other items.
9
When finished, press the MENU EXIT button.
NOTE:
œ
If the ON SCREEN switch is set to the “ON” position,
the items for which “Y” have been set are recorded.
The items for which “N” was set at step
7
above are
not recorded.
Changing the Superimpose Display
Position
1
Turn the power on to all input devices to the VCR.
2
Set the ON SCREEN switch to the “ON” position.
ø
The superimpose display appears.
10-15-2002@TUE@000
15:20:00@@@@@8
3
To change the display position, press the SHIFT
«
(or
]
) button.
ø
The display will move towards the right (or the
bottom).
NOTES:
œ
If the SHIFT
«
(or
]
) button is kept pressed for 1
second or more, the display will move at a faster
speed.
œ
The display position cannot be changed during
recording.
NB4QR/NA (SRT-4040 GB) Tue. Sept., 10/2002
14
English