Sony PEG-T615C - Manual (Page 65)

65
CLIÉ Remote Commander
Chapter 5
3
Tap the arrow V next to the following items and select
the appropriate settings for your device(s).
• Category: Select the device you want to remote-control. Select
from TV, VCR, DVD, AV-AMP (amplifier).
• Maker: Select the manufacturing company of the remote-
controlled device from the drop-down list.
• Mode: Select the remote control mode from the drop-down list
(different models may require a different mode in order to operate).
• Button: Select which quick-start button you wish to assign the
device to. Choose the letter from the drop-down list, or select
none.
4
Point the IR port of the CLIÉ handheld toward the device
you want to remote-control and tap Test (power on/off).
If the device does not respond to the CLIÉ Remote Commander,
select a different mode type in step 3.
5
In the Name box, enter a name for this remote control
setting (e.g. VCR in the den).
6
Tap OK.
A confirm dialog box appears.
7
Tap OK.
The remote control setting is assigned to the selected quick-start
button, and the control screen for the assigned device appears.
8
To assign more devices to the other quick-start buttons,
tap Select on the control screen and repeat steps 2 to 7.
Note
Even if the manufacturer of the device is listed on the supported manufacturer
list on page 102, some devices cannot be remote-controlled depending on its
model or the year of its production.
Example of the VCR remote