beautypg.com

Sony ICF-CD853 User Manual

Tv/weather/fm/am cd clock radio, Important safeguards, Icf-cd853v

background image

3-238-440-21(1)

Sony Corporation

2002

Printed in China

ICF-CD853V

Dream Machine is a trademark of Sony Corporation.

LIMITED WARRANTY

(Portable Audio)

TV/WEATHER/FM/AM
CD Clock Radio

Operating Instructions

WARNING

To prevent fire or shock
hazard, do not expose the
unit to rain or moisture.

This symbol is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.

This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.

The graphical symbols are at the bottom of the
unit.

INFORMATION

This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:

— Reorient or relocate the receiving antenna.
— Increase the separation between the

equipment and receiver.

— Connect the equipment into an outlet on a

circuit different from that to which the
receiver is connected.

— Consult the dealer or an experienced radio/

TV technician for help.

If you have any questions about the product, you
may call:
Sony Direct Response Center 1-(800)-222-7669 or
write to:
Sony Direct Response Center 12451 Gateway
Blvd. Fort Myers, FL 33913

Declaration of Conformity
Trade Name:

SONY

Model:

ICF-CD853V

Responsible Party: Sony Electronics Inc.
Address:

680 Kinderkamack Road,
Oradell, NJ 07649 USA

Telephone Number: 201-930-6972

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.

You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.

CAUTION
The use of optical instruments with this
product will increase eye hazard.

Before You Begin

Thank you for choosing the Sony CD clock radio!
It will give you many hours of reliable service
and listening pleasure.
Before operating the unit, please read these
instructions thoroughly and retain them for
future reference.

Features

• TV/WEATHER/FM/AM 4 band PLL (phase

locked loop) synthesized clock radio

• Easy preset digital tuning with 25 memory

presets

• Built-in CD player with CD-R/RW playback

function

• Easy to see large Display with small footprint.
• Triple Alarm (Radio, buzzer or CD) with the

extendable snooze function.

• Easy nap timer –one push operation.
• LCD with backlight which has a brightness

control switch.

• D.S.T. (Daylight Saving Time) –Summer time

calculation.

Precautions

• Operate the unit on the power source specified

in the “Specifications.”

• The nameplate indicating operating voltage,

etc. is located on the bottom of the unit.

• To disconnect the power cord (mains lead),

pull it out by the plug, not the cord.

• Do not leave the unit in a location near a heat

source such as a radiator or airduct, or in a
place subject to direct sunlight, excessive dust,
mechanical vibration, or shock.

• Allow adequate air circulation to prevent

internal heat build-up. Do not place the unit on a
surface (a rug, a blanket, etc.) or near materials (a
curtain) which might block the ventilation holes.

• Should any solid object or liquid fall into the

unit, unplug the unit and have it checked by a
qualified personnel before operating it any
further.

• When the casing becomes soiled, clean it with a

soft cloth dampened with mild detergent
solution. Never use abrasive cleansers or
chemical solvents, as they may mar the casing.

If you have any questions or problems
concerning your unit, please consult your
nearest Sony dealer.

Troubleshooting

Should any problem occur with the unit, make
the following checks to determine whether or not
servicing is required. If the problem persists,
consult the nearest Sony dealer.
The clock does not show the correct time.
• Has an electrical power outage lasting more

than one minute occurred?

The CD, radio or buzzer alarm does not sound
at the preset alarm time.
• Hasn’t all ALARM indicator lights gone out?
The CD or radio alarm is activated but no
sound comes on at the preset alarm time.
• Has VOLUME been adjusted ?
The CD player does not operate.
• Did you close the CD lid?
• Did you place the disc correctly?

The disc should be placed with the labeled
side up.

• Dusty or defective disc—Clean the disc with an

optional cleaning cloth. Wipe the disc from the
center out.

• Take out the CD and leave the CD

compartment open for about an hour to get rid
of moisture condensation.

Sporadic loss of sound in CD operation.
• Dusty or defective disc—Clean or replace the disc.
• Volume too high—Reduce the volume.
• Strong vibration.
No sound comes from the speakers.
• Hasn’t headphones (not supplied) been

plugged in?
Disconnect the headphones from the i jack.

Specifications

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC
DISTORTION
With 4–ohm loads, both channels driven from
100 – 10 000 Hz; rated 1.0 W per channel-
minimum RMS power, with no more than 10 %
total harmonic distortion in AC operation.

CD player section

System: Compact disc digital audio system
Laser diode properties: Material: GaAlAs

Wavelength: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a
distance of about 200 mm from the objective
lens surface on the optical pick-up block with
7 mm aperture.)

Frequency response: 20-20 000 Hz

+1

–1.5

dB

Wow and flutter: Below measurable limit

Radio section

Frequency range:

TV:

2 – 13 ch

WEATHER: 1 – 7 ch
FM:

87.5 – 108 MHz

AM:

530 – 1 710 kHz

General

Time display: 12-hour system
Speaker: 66 mm (2

5

/

8

inches) dia., 4

Outputs: i (headphones) jack (ø 3.5 mm

stereo minijack)

Power outputs:

1.2W + 1.2W (at 10% harmonic distortion)

Power requirements: 120 V AC, 60 Hz
Dimensions:

Approx. 185.5

Ч

176

Ч

210.5 mm (w/h/d)

(Approx. 7

3

/

8

Ч

7

Ч

8

3

/

8

inches) incl.

projecting parts and controls

Mass: Approx. 1 780 g (3 lb 15

oz)

Design and specifications are subject to change
without notice.

IMPORTANT SAFEGUARDS

For your protection, please read these safety instructions completely before operating the appliance,

and keep this manual for future reference.

Carefully observe all warnings, precautions and instructions on the appliance and in the operating

instructions, and adhere to them.

INSTALLATION

Water and Moisture

Do not use powerline operated appliances near water - for example, near a bathtub, washbowl,

kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

Heat

Do not place the appliance near or over a radiator or heat register, or where it is exposed to direct

sunlight.

Ventilation

The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable

operation of the appliance, and to protect it from overheating, these slots and openings must never be

blocked or covered.

-Never cover the slots and openings with a cloth or other materials.

-Never block the slots and openings by placing the appliance on a bed, sofa, rug or other similar

surface.

-Never place the appliance in a confined space, such as a bookcase, or built-in cabinet, unless proper

ventilation is provided.

Accessories

Do not place the appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall,

causing serious injury to a child or an adult, and serious damage to the appliance. Use only a cart,

stand, tripod, bracket, or table recommended by Sony.

-An appliance and cart combination should be moved with care. Quick stops, excessive force, and

uneven surfaces may cause the appliance and cart combination to overturn.

Wall or Ceiling Mounting

If your appliance can be mounted to a wall or ceiling, mount it only as recommended by Sony.

USE

Power Source

This appliance should be operated only from the type of power source indicated on the marking label.

If you are not sure of the type of electrical power supplied to your home, consult your dealer or local

power company. For those appliances designed to operate from battery power, or other sources, refer

to the operating instructions.

Grounding or Polarization

This appliance is equipped with a polarized AC power cord plug (a plug having one blade wider than

the other), or with a three-wire grounding type plug (a plug having a third pin for grounding). Follow

the instructions below:

-For the appliance with a polarized AC power cord plug:

This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to

insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact

your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized

plug by forcing it in.

-For the appliance with a three-wire grounding type AC plug:

This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to

insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat

the safety purpose of the grounding plug.

Overloading

Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since

this can result in fire or electric shock.

When not in use

Unplug the power cord of the appliance from the outlet when left unused for a long period of time.

To disconnect the cord, pull it out by grasping the plug. Never pull the plug out by the cord.

Power-Cord Protection

Route the power cord so that it is not likely to be walked on or pinched by items placed upon or

against them, paying particular attention to the plugs, receptacles, and the point where the cord exits

from the appliance.

Lightning

For added protection for this appliance during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the appliance due to lightning and powerline surges.

Object and Liquid Entry

Never push objects of any kind into the appliance through openings as they may touch dangerous

voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any

kind on the appliance.

Cleaning

Unplug the appliance from the wall outlet before cleaning or polishing it. Do not use liquid cleaners

or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the appliance.

Clean the appliance only as recommended by Sony.

Attachments

Do not use attachments not recommended by Sony, as they may cause hazards.

ANTENNAS

Outdoor Antenna Grounding

If an outdoor antenna or cable system is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can come in contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN

TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM

IS ALMOST INVARIABLY FATAL.
Be sure the antenna system is grounded so as to provide some protection against voltage surges and

built-up static charges. Section 810 of the National Electrical Code provides information with respect

to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection

to grounding electrodes, and requirements for the grounding electrode.

Antenna Grounding According to the National
Electrical Code

SERVICE

Damage Requiring Service

Unplug the appliance from the wall outlet and refer servicing to qualified service personnel under the

following conditions:

-When the power cord or plug is damage or frayed.

-If liquid has been spilled or objects have fallen into the appliance.

-If the appliance has been exposed to rain or water.

-The appliance does not appear to operate normally or exhibits a marked change in performance.

-This indicates a need for service.

-If the appliance does not operate normally when following the operating instructions, adjust only

those controls that are specified in the operating instructions. Improper adjustment of other controls

may result in damage and will often require extensive work

by a qualified technician to restore the appliance to normal operation.

-If the appliance has been subject to excessive shock by being dropped, or the cabinet has been

damaged.

Servicing

Do not attempt to service the appliance yourself as opening or removing covers may expose you to

dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

Replacement parts

When replacement parts are required, be sure the service technician has used replacement parts

specified by Sony that have the same characteristics as the original parts.

Unauthorized substitutions may result in fire, electric shock, or other hazards.

Safety Check

Upon completion of any service or repairs to the appliance, ask the service technician to perform

routine safety checks (as specified by Sony) to determine that the appliance is in safe operating

condition.

Antenna Discharge Unit

(NEC Section 810-20)

Grounding Conductors

(NEC Section 810-20)

Antenna Lead-in Wire

Ground

Clamps

NEC-NATIONAL

ELECTRICAL CODE

Electric Service

Equipment

Ground Clamps

Power Service Grounding Electrode System

(NEC Art 250 Part H)

Owner’s Record

The model number and the serial number are located on the bottom.
Record the serial number in the space provided below. Refer to them whenever you
call upon your Sony dealer regarding this product.

Model No. ICF-CD853V

Serial No.

For customers in the USA
Please register this product on line at
http://www.sony.com/productregistration.
Proper registration will enable us to send you periodic mailings about new
products, services, and other important announcements.
Registering your product will also allow us to contact you in the unlikely event
that the product needs adjustment or modification. Thank you.

This manual is related to the following products: