Siemens optiPoint 400 - Manual (Page 46)

Step by Step
Making Calls – Convenience Functions
46
d
...
m
Enter the number of the park slot (0 - 9) and make a note
of it. If the park slot number you entered is not dis-
played, it is already in use; enter another one.
Retrieving a Parked Call
Precondition: One or more calls have been parked. The
telephone is idle.
Press the key. The LED lights up.
Select and confirm.
or
rij
Enter the code.
d
...
m
Enter the park slot number you noted earlier.
If the park slot number you enter is not in use, you can-
not retrieve the call.
Placing External Calls on Hold
If you have programmed a key on your telephone as a
hold key
Æ Page 54, you can place external calls on
hold.
This enables all other parties to retrieve the call on the
assigned line.
Press the "US:Hold UK:Common Hold" key.
A message appears showing which line is on hold
(e.g. 801); make a note of the line number.
If a trunk key has been assigned, the LED flashes slow-
ly.
If applicable
t
or Replace the handset or press the key.
Depending on your system configuration, this may be
necessary so other users can also pick up the held call.
Program/Service
Retrieve call?
If a parked call is not picked up, after a specific
period of time the call is returned to the tele-
phone from where it was parked (recall).
Held on line: 801
Release