Sony SRX-T420 - Manual (Page 49)

2-9
SRX-T420
Fig. 2-2-5
2-2-5. PC Communication
The communication between this unit and PC is set.
Projector Identifying: Setting of this unit
Port No: Type the UDP port number.
Interval: Select the packet transmission interval.
Broadcast Address: Type the broadcast address.
[>>] button:
Add the address typed in Broadcast Address to the list.
[<<] button: Delete the address typed in Broadcast Address from the list.
(Registration list): Registration list of the broadcast address.
Controlling PC Destination: Setting of PC
Port No.: Type the TCP port number.
Time-out: Select the time of the communication time-out.
Accept connections from these hosts: Type the IP address of the host that you accept the access.
[>>] button:
Add the typed IP address of the host to the list.
[<<] button: Delete the typed IP address of the host from the list.
(Registration list): Registration list of the IP address of the host that you accept the
access.
Network Block Reboot
[REBOOT] button: Click this button to reboot the network CPU.
n
After setting PC Communication, a reboot of the network CPU is required.