Sony SRX-T420 - Manual (Page 41)

2-1
SRX-T420
Section 2
Adjustment
1. Install an SRX Controller in an adjusting personal computer.
(Refer to Operating Instructions.)
5. Perform illumination range adjustment and registration adjustment.
(Perform these adjustments as required.)
(Refer to Section 2-5.)
6. Perform the γ adjustment and uniformity adjustment using the PJ
COLOR
ADJUSTMENT TOOL.
(Refer to Technical Manual of SRX-T110.)
7. Set the illuminance of a screen and perform color characteristic
correction (CSC adjustment).
(Refer to Section 2-6.)
4. Adjust a lens.
(Refer to Section 2-4.)
3. Perform the optical axis adjustment of a lamp.
(Refer to Section 2-3.)
2. Perform the projector setting.
(Refer to Section 2-2.)
Adjustment is performed using an SRX Controller. Refer to Section 2-7. for how to use an SRX Controller.
Perform adjustment in the procedure below.