Sony SRX-T420 - Manual (Page 16)

1-10
SRX-T420
Adjuster
Protection suit
Arm cover
Hood
Face shield
Face shield
Glove
Arm cover
Glove
Fig. 1-6a
1-6. Installing the Lamp Bulb
w
. Be sure to turn off the power of this unit before installing the lump bulb.
. Be sure that only the qualifi ed service personnel can install the lamp bulb. For the qualifi cation, please
contact your local Sony Sales Offi ce/Service Center.
. When installing the lamp bulb, be sure to wear the protection suit kit (J-7120-330-A (M size), J-7120-
340-A (L size), or J-7120-460-A (XL size)). Also, wear the shoes that cover the instep of the foot com-
pletely.
. Be extremely careful when handling the xenon lamp bulb because a high voltage is applied to it.
. Do not touch the lamp bulb with bear hands. Otherwise, it may break the lamp bulb.
Wearing of protection suit kit
1. Wear the jacket and trousers.
2. Wear the arm cover on both hands so that the wrists are
completely covered.
3. Wear the hood and attach the face shield.
4. Adjust the face shield to the head size using the ad-
juster on the back of the face shield.
5. Wear the glove on both hands.