10. connecting the power cord – Sony SRX-T420 User Manual

Page 30

Text mode
Original mode

1-24

SRX-T420

1-10. Connecting the Power Cord

Use the 3-core power cord that satisfy AWG 8, 250 V rated and 40 A rated.
Connect the power cord to the AC IN terminal block on the rear side of this unit, referring the following
procedure.

w
. Connection of the main power and the electric wiring work should be done by qualifi ed electricians

only.

. Do not plug the power cord into the power supply before completing all of the following connecting op-

erations.

1. Remove the two screws.
2. Remove the terminal block cover with attention to the

two hooks.

3. Remove the screw, then remove the cable clamp.
4. Remove the screw, then remove the ground terminal.

Screws

Hooks

Terminal block cover

Screw

Cable clamp

Ground terminal

Fig. 1-10a

Fig. 1-10b