beautypg.com

Siemens ESM User Manual

Page 72

background image

Installation, Commissioning, Cleaning and Maintenance

Industrial Ethernet OSM/ESM

68

C79000-Z8976-C068-10

Installation in Pairs in the 19" Cubicle

To install in pairs in the 19" cubicle, you require the two securing brackets
supplied.

1. First screw the two OSMs/ESMs together using the supplied holding plate on

the rear.

2. Fit two of the supplied brackets to the sides

3. Secure the two devices using the brackets in the 19" cubicle. Please note that

the OSM/ESM must be grounded with a low resistance via the two holding
brackets.

Figure 30: Installation in the 19" Cubicle

Interconnecting the devices at the rear

This manual is related to the following products: