beautypg.com

Siemens ESM User Manual

Page 69

background image

Installation, Commissioning, Cleaning and Maintenance

Industrial Ethernet OSM/ESM
C79000-Z8976-C068-10

65

Standard Rail Mounting

1. Install the OSM/ESM on a 35 mm standard rail complying with DIN EN 50022.

2. Fit the OSM/ESM on to the rail from above and press in the bottom of the

device until the catch engages.

3. Fit the electrical and optical connecting cables, the terminal block for the power

supply and, if necessary, the standard cable 9/9 to the standby-sync port.

Figure 27: Installing the OSM on a DIN Standard Rail

This manual is related to the following products: