Siemens ESM - Manual (Page 19)

Introduction
Industrial Ethernet OSM/ESM
C79000-Z8976-C068-10
15
1.1.5 OSM TP62
Possible Attachments
The OSM TP62 allows attachment of up to 6 DTEs or network segments with TP
connectors. By coupling an OSM via ports 7 and 8 it is possible to create optical
bus and ring structures. The OSM TP62 can be linked with other OSM TP62, OSM
TP22, OSM ITP53, OSM ITP62, and OSM BC08 modules via the optical ports.
The OSM TP62 also has eight digital inputs. The states of the inputs are available
in a management information base (MIB) and can be read using an SNMP get
request. Depending on the configuration of the device, changes at these inputs can
also trigger the sending of E-mails, SNMP traps and/or entries in the log of the
OSM. The use of this function is described in the OSM/ESM Network Management
User Manual /1/.
Figure 5: OSM TP62