Sony KWP 65HD1 - Manual (Page 60)

56
CHANNEL FIX
Locks selection of
your projection
TV’s input when
used in conjunction
with external
equipment such as
a cable box, AV
receiver, etc.
2-6: When the cable box is connected to the VHF/UHF input, you can fix the TV’s
input to one of the channels between 2 and 6. Press DBS/CABLE (FUNCTION)
and then CH +/– to change the cable box channels.
AUX 2-6: Use this when a cable box is connected to AUX, and a cable or antenna
is connected to VHF/UHF.
VIDEO 1: Use this when you have connected external video equipment (e.g. AV
receiver) and you want the projection TV’s input fixed to it.
OFF: When you want to switch CHANNEL FIX off.
If the projection TV is in the AUX mode when you turn CHANNEL FIX off, press
ANT to return to UHF input mode.
TIMER settings are erased when CHANNEL FIX is set.
Note:
• You cannot change channels with the TV’s
tuner when you set CHANNEL FIX. If
you want to use the TV’s tuner while
fixing the TV’s input to VIDEO 1, use the
SET UP menu to set SELECT OUT to TV
OUT. (see “SELECT OUT” on page 60)
Using Conventional TV Features (continued)