Sony KWP 65HD1 - Manual (Page 37)

33
Using the Setup Menu
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Setup Menu Selection” on page 32.
Note:
• If there are no DTV channels saved in
channel memory (no DTV channels found
during “Auto Program” or “DTV Auto
Add”), the “Name & Logo” and “Skip/
Add” features in the Setup Menu cannot
be accessed.
Channel Setup
Basic channel and
display options
Auto Program: Select to scan and preset digital channels automatically. Before
“Auto Program” process, a dialog box pops up with the message “Are you sure
you want to clear your existing channel list?” Move the joystick left or right to
select OK, and press
to activate “Auto Program.” A tuning indicator appears
and the projection TV starts scanning and presetting digital channels
automatically. When all the receivable channels are stored, the lowest channel
is displayed and the tuning indicator disappears.
Note:
• If you currently have a list of programmed channels, or “Name and Logo” or
“Skip/Add” setting, they will be erased when you perform “Auto Program.”
DTV Auto Add: Select to preset additional digital channels as they become
available without erasing original channels (after you use Auto Program).
During the “DTV Auto Add” process, a tuning indicator appears and the
projection TV starts scanning and adding new digital channels. When scanning
is complete, the indicator disappears and the current channel re-appears.
Name and Logo: Select to add or change the station
name and logo.
When selected, a dialog box pops up.
1 Press CH +/– to select the desired channel.
2 Move the joystick left or right to select the station
name and the corresponding logo.
3 Move the joystick up or down—and then left or right—
to select OK, and press .
To clear the dialog box without changing the name and logo for the current
channel, move the joystick up or down—and then left or right—to select
“Cancel,” and press
.
(continued)
Dialog box
Name and Logo
Press CH+/– to change channels.
Press “ ” to toggle Name/Logo.
OK Cancel
Channel 30 FOX FOX
Auto Program
DTV Auto Add
Name and Logo
Skip/Add
Time Zone
Channel Setup
Caption Vision
VTR Recording
Language