Sony KWP 65HD1 - Manual (Page 55)

51
Adjusting the speaker volume
using the test tone
The TEST TONE feature makes it easier to
adjust the volume level. You can use this
feature for aPRO LOGIC and a3 STEREO
modes only.
1 With the SURROUND LEVEL window
open, move the joystick up or down to
select TEST TONE and press
.
2 Move the joystick up or down to select
ON.
A test tone will be output from each
speaker in sequence:
Front left nCenter nFront right nRear
To turn off the test tone, select OFF.
3 Follow steps 2 through 4 in “Adjusting
the speaker volume.”
Adjusting the Speaker
Volume for Customized
Surround Mode
After you set SURROUND to one of the
modes, adjust the volume of the front, center
and rear speakers to the same level so that
the projection TV’s sound will be even and
natural. For aPRO LOGIC and a3
STEREO, adjust the speaker volume using
the test tone feature.
Adjusting the speaker volume
1 Select SURROUND LEVEL from the
AUDIO menu. (see pages 49 and 50)
2 Move the joystick up or down to select
the speaker for volume adjustment and
press
.
CENTER: Select to adjust the level of the
center speaker. (not available for
SIMULATED)
REAR: Select to adjust the level of the rear
speakers. (not available for
a3 STEREO)
BALANCE: Select to adjust the balance
between the right and left speakers.
3 Move the joystick up, down, left or right
to adjust the volume level and press
.
4 Use the joystick to select other speakers
and to adjust the volume levels.
n
a PRO-LOGIC
REAR
BALANCE
TEST TONE : OFF
CENTER
Move Select Exit MENU
a PRO-LOGIC
REAR
BALANCE
TEST TONE : OFF
CENTER
Move Select Exit MENU
REAR
BALANCE
TEST TONE : ON
OFF
CENTER
a PRO-LOGIC
Move Select Exit MENU