Sony KWP 65HD1 - Manual (Page 45)

41
(white labeled button)
(white labeled
button)
Press to select the TV channel on which the symbol “ b ” (or “ B ”) is
displayed. (for details, see “Watching Conventional TV” on page
36)
Press to change between the VHF/UHF input and the AUX input for the picture on
which the symbol “
b ” (or “ B ”) is displayed.
Press to alternate sound between the main picture and the window picture. The
symbol "
" will appear for a few seconds to indicate which picture’s sound is being
received.
This is useful when you need to copy down information that appears on the TV’s
screen.
Press to freeze the main and window pictures.
Press again to resume PIP viewing. Press
(OFF) to cancel and resume normal TV
viewing.
Press to switch the audio and video of the main picture and the window picture.
Each time you press SWAP, the picture and sound of the two will be exchanged.
Press to access CHANNEL INDEX for direct channel selection. (see “Using
CHANNEL INDEX” on page 44)
Press to cancel the PIP function and return to normal viewing.
Using the Yellow Labeled Buttons for PIP Operations
Notes:
• If one of the pictures received through
PIP is snowy, the entire screen may
become unstable. In this case, erase the
snowy channel. (see “CHANNEL SKIP”
on page 54)
• You can change the wide screen mode of
the main picture only. The mode is not
available for the window picture.
• The 16:9 aspect ratio picture with ID-1 or
S1 is always displayed in FULL mode,
even when it is shown as the window
picture.
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
CH
or or 0 9 -
JUMP
and ENTER
AUDIO
FREEZE
SWAP
OFF
TV ANT