Sony ZS-M30 - Manual (Page 38)

38 GB
Timer-recording radio
programmes
You can set timer to record the radio at a
certain time. You can also record from the
component connected to the LINE IN jack of
the player.
Make sure you have set the clock (see
“Setting the clock” on page 35).
Before you begin, make sure “TIMER” is
not displayed. If displayed, press
STANDBY.
1
Tune in the radio station and insert an
MD.
2
Press CLOCK/SLEEP/TIMER until
“Timer Set” appears in the display, and
press YES•ENTER.
“TIMER” flashes in the display.
Make the following settings by
checking the indications in the display.
3
Turn the jog dial until “Stereo REC” or
“Mono REC” flashes in the display, and
press YES•ENTER.
To cancel the sleep function
1 Press CLOCK/SLEEP/TIMER until
“Sleep Set” appears in the display, and
press YES•ENTER.
2 Turn the jog dial to select “Off”.
To change the preset time
Do the steps 2 and 3 again.
Tips
• You can combine the waking up timer with the
sleeping timer. Set the waking up timer first
(page 36), turn on the player, and then set the
sleeping timer.
• You can prepare the different music for the
waking up timer and the sleeping timer.
However, you cannot store different radio
stations.
• You can set different volume for the waking up
timer and the sleeping timer. For instance, you
can sleep at lower volume and wake up at higher
volume.
Falling asleep to music
(continued)
YES
ENTER
Jog dial
STANDBY
CLOCK/SLEEP/TIMER
NO
CANCEL