Sony ZS-M30 - Manual (Page 29)

Editing recorded tracks on the MD
29 GB
3
Press YES•ENTER.
“Combine OK?” appears in the display;
the player enters the playback pause
mode.
If you want to cancel the combine
function at this point:
Press NO•CANCEL or MD x.
4
Press YES•ENTER.
“Complete” appears in the display for a
few seconds after the tracks are
combined. If both of the combined
tracks had track names, the name of the
latter track is erased.
Notes
• If “Sorry” appears in the display, you cannot
combine the tracks.
If you repeat editing on the MD, you may not be
able to combine the tracks. This is due to the
system limitations of the MD (page 46), but not
caused by mal function.
• If “Cannot Edit” appears in the display, you may
be trying to combine the tracks on the first track.
You cannot use the combine function on the first
track.
• After you stop editing,
do not disconnect the
mains lead or move the player while
“TOC EDIT” is flashing in the display.
If
you do so, editing may not be done properly.
Moving recorded tracks
(Move Function)
You can change the order of the tracks.
After you move the track, the track numbers
are renumbered automatically.
EDIT
YES
ENTER
NO
CANCEL
MD x
Jog dial
Example: Moving the track C to the position
of track 1
1
Play the track you want to move.
2
Press EDIT repeatedly until “Track
Move” appears in the display.
3
Press YES•ENTER.
“
tTrack 003?” appears in the display,
and one-track repeat play starts.
Track number of the C changes to 1
Track
number
Moving
continued