10 user graphic interface, 11 ip camera support, 2 key beep – Speco Technologies 8TH User Manual

Page 87

User’s Manual

DVR-4TH/8TH/16TH Series

SPECO TECHNOLOGIES 07/10

5.1.9.2 Key Beep

This item is used to enable or disable the key tone. Select to enable the
key tone, or to disable.

5.1.10 User Graphic Interface

The OSD system can be displayed in graphic mode or text mode according to
users’ preference. Set this menu to and the OSD system will be
displayed in GUI mode. Alternatively, set this menu to and the OSD
system will be displayed in text mode.

5.1.11 IP Camera Support

Enter this item to add IP cameras to the DVR. The DVR supports up to 4 IP
cameras. Select <0> will make the DVR act as a traditional analog DVR.
Select <1> to <4> allows users to add 1 to 4 IP cameras to the DVR.

After the is set to <1> to <4>, the following message
will be displayed. Press ENTER to apply the changes, or ESC to exit.

Notice!!

DVR must reboot to apply the change

ENTER: Yes ESC: No

NOTE:

1. The existing database will NOT be re-formatted after switching to

this function.

2. Alarm I/O, Motion detection function, and audio of the IP camera

are NOT currently supported