Speco Technologies 8TH User Manual
Page 76
User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10
75
To setup the Dial-in Account, follow these steps.
• Select
virtual keyboard displays.
Dial-in Account
! @ #
*
-
_
+
=
,
.
/
Back
1 2 3
4
5
6
7
8
9
0
Del
A B C D E
F G H
I
J
K
L M
N O P Q R S
T
U V W X Y Z
a b c
d
e
f
g
h
i
j
k
l m
n o p
q
r
s
t
u
v
w
x
y z
<< >>
Space
Cancel
OK
• Use Direction keys to move the cursor to the desired character.
• Press ENTER to add the selected character to the entry field.
• When done, move the cursor to
settings and exit.
NOTE: The Server IP and the Client IP must not be identified as the
same IP address; but they have to be set in the same domain.
For example: Server IP= 192.168.0.1 ; Client IP= 192.168.0.2
Dial-in Password
This item allows the user to setup the Dial-in password. Follow these steps to
setup the login password.
• Select
virtual keyboard displays.
• Use Direction keys to select character.
• Press ENTER to add the selected character to the entry field.
• When done, move the cursor to
settings and exit.
Server IP
This item is for setting the IP address that identifies the DVR-4TH/ 8TH/ 16TH
series unit over a modem connection. To set the server IP, follow these steps:
• Select
• Using LEFT/ RIGHT to move the cursor over the IP, and stop where you
want to make the change.
• Press ENTER, and then use UP/ DOWN to change the value.
• When done, press ENTER again to exit.
• Repeat the procedure until the IP is completely set.