Speco Technologies 8TH - Manual (Page 104)

User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10 103
5.4.5 ezRecord Setup
This item aims to avoid the complicated record settings and to make the setup
much easier. Note that this item can be reached only when you select
as the option for . For more information, please
refer to the appendix ezRecord Diagram Sample.
Select from and press ENTER, the
sub-menu appears as shown below:
ezRecord Setup
How Many Days To Record
Daytime Record
Night Record
Weekend Record
Average Normal PPS
Average Normal Quality 2 Days
Yes
Yes
Yes
3.75
Best
Follow these steps to Setup ezRecord:
• Select and press ENTER, then press
UP/DOWN to choose an option. The average normal PPS & Quality will
be adjusted automatically. The maximum of days depends of the size of
your HDD, in the other words, the larger the HDD installed, the more days
the unit can record.
• Move to and press ENTER. This item is for you to
select whether you want the DVR to record during daytime. If so, use
UP/DOWN to select as an option; or, select for not recording
during daytime.
• Repeat the same procedures through the 3rd and 4th item, respectively.
Note that will be not accessible if you select for
the item in .
• Select and press ENTER, then press UP/DOWN
to choose an option. The will be computed
automatically.
• Select and press ENTER, then press
UP/DOWN to choose an option. The will be
computed automatically.
Record Info