3 smart search – Speco Technologies 8TH User Manual
Page 44
User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10
43
4.3.3 Smart
Search
Smart Search allows users to search for recorded videos according to specific
date/time, channel, and monitoring area. Follow the steps below to search
recorded video via Smart Search.
• Press SEARCH button to enter the Search menu.
• Move the cursor to
menu will be displayed as below.
Smart Search
From:
End:
Select Channel
Select Search Area
Search Sensitivity
Search Threshold
Interval
Smart Search List
2009/01/01 AM00:00:00
2009/05/01 AM00:00:00
CH1
77%
50%
60 Sec
• Specify the From/End time to search for recorded video within the period.
• Choose a channel for smart search.
• Setup the monitoring area following the special operation described in
appendix USB Mouse Operation.
• Specify detection sensitivity and threshold according to environment and
required application.
• The time interval specified here will be time segment of smart search. That
means, if the total time period is 10 minutes, and the time interval is 60
seconds, then there will be 10 time segments. Therefore, if video satisfied
the smart search criteria is found in the 4th segment, only the 4th segment
video will be reported on the Smart Search List.
• When the criteria are all set, select
ENTER to start the smart search.
When the Smart Search List is displayed, use Direction keys to scan through
the list. Press ENTER to playback any desired item, or press ESC to exit the
list.