Speco Technologies 8TH - Manual (Page 150)

User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10 149
Appendix D: Dial-up Connections via Modem
A dial-up modem connection allows the user to use the remote software and receive alarm
notice without a direct Internet connection. Following are the steps for establishing the
connection between a DVR-4TH/ 8TH/ 16TH series unit and a PC.
Establishing Dial-in Connection
The Dial-in function enables the user to establish dial-up modem communication to and
from the DVR-4TH/ 8TH/ 16TH series unit for the remote software use. Follow the
description to set up your DVR and PC.
DVR Configuration:
• Connect a USB modem to the USB socket and connect a working phone line to the
modem.
• Press MENU and input username and password with appropriate privilege to
access the OSD Main menu. Select and then to
set up the Dial-In settings, including Dial-in Account and password, etc.
• For more information on dial-in settings, see section Dial-in Setup.
PC Configuration:
• Click , , and then select
. The New Connection Wizard is displayed. Click
to continue.