6 ip camera setting, 3 network time protocol setup – Speco Technologies 8TH User Manual

Page 31

User’s Manual

DVR-4TH/8TH/16TH Series

SPECO TECHNOLOGIES 07/10

3.5.3

Network Time Protocol Setup

This section guides you to synchronize your unit to fit the local time.

Go the Æ Æ . Refer to below
figure and select your time zone from the options.

Then go to Æ Æ Setup> and select for the item . When this
function is ON, time sync will be performed every hour in order to observe
correct time of your local zone.

NOTE: If you want the unit to automatically synchronize the local time,
the item MUST NOT be set to , or the function

cannot be activated.

3.6

IP Camera Setting

The distinctive hybrid solution of the DVR enables users to connect IP
camera(s) while others are analog cameras. First enter the OSD setup menu
with a proper account and access Æ
to select the number of IP cameras to be connected. The supported channels
of IP cameras will be from the largest numbers, for example CH16 for 16ch
models.