Speco Technologies 8TH - Manual (Page 86)

User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10 85
5.1.8.2 Baud Rate
The Baud rate options for association with the protocol are <2400>, <4800>,
<9600>, <19200>, <38400> and <57600>. The default is <9600> baud.
5.1.8.3 Bits
The user can specify the bits in a word that are associated with this protocol.
The available options are <6>, <7> and <8> bits. The default is <8> bits.
5.1.8.4 Stop
The user can specify the stop bit associated with this protocol. Options are
<1> and <2> stop bits. The default is <1> stop bit.
5.1.8.5 Parity
This item is used to specify the parity associated with this protocol. Options
are , , and . The default is .
5.1.9 Audio Output/ Key Beep
Enter this menu to setup the audio output or key beep.
Audio Output/ Key Beep
Audio Output
Key Beep Live/PB
ON
5.1.9.1 Audio Output
The item is used to set the audio output mode. The available options are as
listed as follows.
Select this item to play the recording sounds of live image in live mode, and
sounds of recorded video in playback mode respectively.
Select this item to play live sounds in both live mode and playback mode.
Select this item to disable the audio output function.