Speco Technologies 8TH - Manual (Page 34)

User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10 33
IP Dome Protocol
If the connected device is an IP Dome Camera, then select an appropriate IP
Dome Protocol from the provided options.
3.6.3 Device Setup
Enter to configure the basic settings of the IP camera. The
basic settings include the IP camera’s product name, image quality, image
adjustment, etc. Set the item to to apply the changes.
NOTE: The menu may have fewer or more menu
items according to different IP camera models.
3.6.4 Activated
Access this item and select to activate the connection to the IP camera.
To deactivate the connection, select .
NOTE: Once the connection to the IP camera is activated, menu items
, , and will be grayed out
and cannot be accessed.
3.6.5 Status
After the connection to the IP camera is activated, users can check the
connection status. The menu will be shown as below.
Status
Model
Streaming Format
Resolution
PPS
Bandwidth
Pkg. lost rate ****
MPEG4
640x480
10
20 KB/Sec
0.1%
The information shown on the monitor is “read only”.