6 data lifetime setup – Speco Technologies 8TH User Manual
Page 105
User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10
104
NOTE: The current number of connected cameras will affect the
recording quality which wil be automatically calculated through the
connect more cameras to the unit, you should reset the
5.4.6
Data Lifetime Setup
Data Lifetime indicates the duration that a video is saved and recallable in the
HDD. Only those video recorded within Data Lifetime can be displayed on the
screen and played back. The video exceeded Data Lifetime will be hidden
and cannot be retrieved for playback.
Data Lifetime Setup
Data Lifetime Mode
Data Lifetime
Data Lifetime By Day
Data Lifetime By Channel
General
0 Days
NOTE: To playback a video exceeding the data lifetime, please extend
the duration until the recording data / time of the video is included.
5.4.6.1
Data Lifetime Mode
This item allows the user to choose preferred data lifetime mode. There are
three types of data lifetime mode: General, By Day, and By Channel. When a
specific mode is selected, the other two will be grayed out and cannot be
accessed.
5.4.6.2 Data Lifetime
When data lifetime mode is set as
Press ENTER to select this item and press UP / DOWN keys to set the data
lifetime. The value ranges from <1> to <365> days. Alternatively, select <0>
to disable this function.
5.4.6.3
Data Lifetime By Day
When data lifetime mode is set as
Enter this menu and the user can setup data lifetime of each weekday
independently. The value ranges from <1> to <365> days. Alternatively, select
<0> to disable this function.