4 input setup – Speco Technologies 8TH User Manual
Page 127
User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10
126
certain value will be marked as an exception. That
specific value need to be configured through the
following sub-setting
be marked as an exception. The range need to be
configured through the following sub-settings
and
will be marked as an exception. The range need to
be configured through the following sub-settings
NOTE: Only transactions (1) after “Exception Strings” and “By
Numerals” are set and (2) after “Trigger” is
exceptions in text database. The data stored before won't be marked
as exceptions.
5.10.4
Input Setup
This item is used to choose the connection method that is between your Text
Device and DVR, and setup some relative settings of the connection method.
Input Setup
Port Selection
Input Source
Camera Selection
Text Filter
Manual Filter Setup
Input Process
Text Baud Rate
Text Bits
Text Stop
Text Parity
Serial Port
Direct Connected
1
ASCII
Canonical
9600
8
1
None