Swann P-6T4 - Manual (Page 34)

Digital Video Recorder User Manual
30
1. UICK FORMAT
STEP1 Press "Up", "Down", "Left" and "Right" buttons to move the cursor.
STEP2 Select "QUICK Format" check box.
2. FORMAT
STEP1
Press "Up", "Down", "Left" and "Right" buttons to move the cursor.
STEP2 Select "FORMAT" button.
STEP3 Press "Enter" key, a hint will pop up: ‘FORMAT WILL ERASE ALL DATA ON THIS HDD! FORMAT NOW? ’
STEP4 Press "OK" button to format the HDD; Press "CANCEL" or "ESC" button to cancel this operation.
Notice:
• If HDD is used for the first time, system will remind user to format the HDD when the DVR started up. And HDD could record after the
HDD is formatted.
• Before you format the HHD, you must stop recoding and playing back.
• Time for formatting the HDD is subjected to the HDD capability. The bigger capability is, the time is longer. Normally, a 40G HDD takes
about eighty seconds to format.
SYSTEM LOG
System log submenu is shown as Fig3.29 Log Search. You could inquire the operation log on DVR. The DVR will note the
operation, status and time automatically when the DVR is working. After enter the submenu, you need to select the
operation and status type which you need to inquire.
Fig3.30 System Information Fig3.29 Log Search