JVC LVT1778-001A - Manual (Page 627)

29
EXTERNAL DEVICES
Using the Bluetooth cellular phone
Adjust the volume of the incoming calls.* 2
When a call comes in...
The source is changed to “Bluetooth PHONE”
automatically.
Name and phone number (if acquired)
When is activated...
The unit answers the incoming call automatically.
(
☞ page 51)
☞ page 31
When is deactivated...
To answer the incoming call
• Press any button on the monitor panel (except
/ATT or +/–).
• Press the message displayed on the touch panel.
To end the call
• Hold any button on the monitor panel (except
/ATT or +/–).
• Hold the message displayed on the touch panel.
• You can adjust the microphone volume. (
☞ page 51)
~
Press [SOURCE], then press [Bluetooth PHONE]. (
☞ page 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ
Press [AV MENU].
• You can also use AV MENU on the monitor panel.
!
Press [Bluetooth].
⁄
Establish the connection with a device, then make a call (or settings using
menu).
☞ pages 50 and 51
Sound mode
(
☞ page 41)
Status of the device
Signal strength/Battery
remainder
(only when the information
comes from the device)
[AV MENU] Hold: Activates function
[
5 ∞
] Select the registered device
(“New Device” appears when a new device can be registered.)
The Bluetooth icon
lights up when
the adapter is
connected.
: Buttons on the touch panel. In the
explanation, they are indicated inside
[ ].
* 1 When a cellular phone with audio function is connected, appears.
* 2 This adjustment does not affect the volume level of the other sources.
* 1
EN_KW-AVX714[UI].indb 29 EN_KW-AVX714[UI].indb 29 08.1.16 2:38:10 PM 08.1.16 2:38:10 PM