JVC LVT1778-001A - Manual (Page 509)

SETTINGS
49
ENGLISH
Sound
Menu items Selectable settings, [reference page]
Fader/Balance Adjust fader—speaker output balance between the front and rear speakers.
• Upmost—front only (F6)
• Downmost—rear only (R6)
When using a two-speaker system, set the fader to the center (0).
Adjust balance—speaker output balance between the left and right speakers.
• Leftmost—left only (L6)
• Rightmost—right only (R6) Initial 0
Volume Adjust Adjust and store auto-adjustment volume level for each source, comparing to
the FM volume level. The volume level will automatically increase or decrease
when you change the source.
–12 to +12; Initial 00
• You can make the adjustments separately for DVD and other discs.
Amplifier Gain You can change the maximum volume level of this unit.
Off: Deactivates the built-in amplifier.
Low: VOL 00 to 30 (Select this if the maximum power of the speakers is less
than 50 W.)
High: VOL 00 to 50
Mode* 1
Menu items Selectable settings, [reference page]
Mono Only for FM. (Off, On) ☞ [10]
DX/Local Only for FM. (Local, DX) ☞ [11]
SSM Only for FM. Press and hold to start SSM. ☞ [11]
Title Entry Only for FM/AM stations, “AV-IN,” and “EXT-IN.” ☞ [42]
Repeat ☞ [18, 35, 37]
Random ☞ [18, 35, 37]
* 1 Items listed under <Mode> vary among the playback sources.
List
For “DISC”: Folder List and Track List (☞ page 19)
For “CD-CH”: Disc List, Folder List, and Track List (☞ page 34)
• For the other playback sources, you can display a list by pressing DISP on the monitor panel. (☞ page 9)
Initial: Underlined
EN_KW-AVX710[UN].indb 49 EN_KW-AVX710[UN].indb 49 07.12.17 5:03:05 PM 07.12.17 5:03:05 PM