JVC LVT1778-001A - Manual (Page 170)

14
ENGLISH
Activating/deactivating TA/PTY
Standby Reception
TA Standby Reception Indicator
Press on the monitor panel to
activate.
TP
The unit will temporarily switch to
Traffic Announcement (TA) if available,
from any source other than AM.
• The volume changes to the preset
TA volume level if the current level is
lower than the preset level (☞ page
54).
Lights up
Not yet activated. Tune in to another
station providing the Radio Data
System signals. Flashes
Press to deactivate. Goes off
PTY Standby Reception Indicator
To activate, display <AV Menu>
screen, press [Mode], then press
[On] for <PTy Standby>. (☞ next
column)
PTY
The unit will temporarily switch to
your favorite PTY programme from any
source other than AM. Lights up
Not yet activated. Tune in to another
station providing the Radio Data
System signals. Flashes
To deactivate, press [Off] for <PTy
Standby> in step 3 on the next
column. Goes off
• When a DAB tuner is connected, TA Standby/PTY
Standby Reception also works for the DAB tuner and
searches for the services.
To activate PTY Standby Reception
1
Press [AV MENU].
2
Press [Mode].
3
PTY Standby Reception is now activated for PTY
code <News>: the initial setting.
You can easily activate or deactivate the PTY
Standby Reception by pressing [SHORT CUT] on the
touch panel, then...
☞ page 12
☞ page 48
EN_KW-AVX710[EE].indb 14 EN_KW-AVX710[EE].indb 14 07.12.6 2:19:09 PM 07.12.6 2:19:09 PM