JVC LVT1778-001A - Manual (Page 580)

50
Bluetooth* 1
Menu items Selectable settings, [reference page]
Dial Menu * 2 Select the method to make a call. ☞ [30]
Message* 3 You can read a message from the following message histories.
Unread: Messages you have not read.
Read: Messages you have read.
Unsent: Messages you have not sent.
Sent: Messages you have sent.
• The number of messages in each history is also shown.
Open ☞ [27]
Search ☞ [28]
Special Device Only for “New Device.”
Shows the list of Bluetooth devices which require some special procedure to
establish Bluetooth connection. Select a device you want to connect.
• After selecting the device, use <Open> or <Search> (☞ page 27 or 28)
for connection.
• Once the connection is established, it is registered in the unit. You can
connect the unit and the device by using <Connect> (☞ below) from the
next time.
Connect Only for the registered devices.
After selecting a device from among the registered devices (☞ pages 27 and
28), establish the connection with it.
Disconnect Only for the device being connected.
Disconnect the current device before connecting another device.
Delete Pairing Only for the registered devices.
Delete the registered devices.
* 1 Selectable only for “Bluetooth PHONE” or “Bluetooth AUDIO.” Select a device (or “New Device”) before operating the
menu.
* 2 Only for the device connected for “Bluetooth PHONE.”
* 3 Selectable only when the source is “Bluetooth PHONE” and the connected cellular phone is compatible with SMS
(Short Message Service).
When operating the Bluetooth device, refer also to the instructions supplied with the device.
The procedure for setting an item is shown on page 43.
EN_KW-AVX710[A].indb 50 EN_KW-AVX710[A].indb 50 07.12.17 4:49:17 PM 07.12.17 4:49:17 PM