JVC VN-C625 - Manual (Page 69)

69
The "V.Networks Controller" can be used to set the action to be taken when an
alarm signal is received.
1.
Select [Setting] and [Alarm Setting].
3-8 Alarm Setting
2.
Change the set values. (For description of each function,
☞
next page)
Setting may be performed for the [Motion Detection], [Alarm 1], [Alarm 2], [Relay Alarm], [Preset
Position] and [Black & White].
3.
When setting is complete, click .
1
2
3
4
(Setting of 1 and 2 are disabled when in the
Relay Alarm mode.)
C625_p58-p79 05.3.4, 7:06 PM 69