JVC CA-MXS6MD - Manual (Page 64)

– 61 –
English
3
Push the joy control rightward ( ) or leftward ( )
to select the play mode you want.
• The playback modes change as follows:
When the source is “CD”
• See pages 23 and 24 for details.
When the source is “MD”
• See pages 28 and 30 for details.
4
Press SET to finish the setting.
Setting the repeat modes
When the source is “CD” or “MD,” you can change its
repeat modes through the menu.
1
Press MENU.
The menu screen appears in the main display.
• If the current source is not “CD” or “MD,” you
cannot go to the next step.
2
Push the joy control downward ( ) to select
“CD REPEAT (current repeat mode setting*)” or
“MD REPEAT (current repeat mode setting*).”
* The current repeat mode will appear following
“CD REPEAT” or “MD REPEAT.”
3
Push the joy control rightward ( ) or leftward ( )
to select the play mode you want.
• The repeat modes change as follows:
When the source is “CD”
* “1CD” is not used for Program play and Random play.
• See page 25 for details.
When the source is “MD”
• See page 30 for details.
4
Press SET to finish the setting.
1
OFF
1CD
ALL
(Canceled)
1
OFF
ALL
(Canceled)
PROGRAM RANDOM
CONTINUE
PROGRAM RANDOM
NORMAL
*
FM Reception Mode Setting
When an FM stereo broadcast is hard to receive or noisy,
you can change the FM reception mode to “MONO” so that
reception improves.
1
Press MENU.
The menu screen appears in the main display.
• If the current source is not “FM,” you cannot go to
the next step.
2
Push the joy control downward ( ) to select
“FM MODE (current play mode setting*).”
* The current play mode — AUTO or MONO will
appear following “FM MODE.”
3
Push the joy control rightward ( ) or leftward ( )
to select the FM reception mode you want.
AUTO : Normally select this.
In this mode, you can hear stereo sound
when a program is broadcast in stereo. In
addition, static noise between stations
will be erased while tuning.
MONO : Select this when an FM stereo broadcast
is hard to receive or noisy. Reception
improves though stereo effect is lost.
4
Press SET to finish the setting.
CD and MD Playback Mode Setting
Selecting the playback modes
When the source is “CD” or “MD,” and playback has not
been started, you can change its playback modes through
the menu.
1
Press MENU.
The menu screen appears in the main display.
• If the current source is not “CD” or “MD,” or if CD
or MD play has been started, you cannot go to the
next step.
2
Push the joy control downward ( ) to select “CD
(current play mode setting*)” or “MD (current play
mode setting*).”
* The current play mode will appear following “CD” or
“MD.”
EN58-64.CA-MXS6MD[US/UB]/f 00.10.10, 9:56 AM 61