JVC CA-MXS6MD - Manual (Page 50)

– 47 –
English
7
Input a character.
• Ex. When entering “H”
1) Push the joy control horizontally ( / ) and
vertically ( / ) until “H” is selected.
2) Press SET.
The selected character is entered, and the character
entry position moves to the next.
• To change the character set, select this, and
press SET.
• To move the character entry position while
entering a title, select
3 for moving it
rightward and
2 for moving it leftward,
then press SET.
Each time you press SET, the character
entry position moves.
• To enter a blank, select a blank in the main
display, then press SET.
• If you have entered an incorrect character, press
CANCEL to cancel the last entry.
8
Repeat steps 6 and 7 to enter other characters.
• The main display can only show 7 characters at a
time. If you enter the 8th character, the first character
disappears, and so on.
9
Press ENTER/DEMO to finish the current title
entry.
The unit enters title entry mode again.
• You can assign another title by repeating steps
4 to 9.
10
Press TITLE/EDIT (or ENTER/DEMO again) to
exit from the title entry mode.
11
Press
0 for the MD recorder to eject the MD.
“WRITING” flashes while the editing you have made
is being recorded on the MD.
You can assign titles during play or recording
• During play:
Entering a track title
The MD recorder repeats playback of the current track until you
press ENTER/DEMO in step
9 above. When you press ENTER/
DEMO, the next track will be played.
Entering a disc title
The MD recorder repeats playback of all tracks of the MD until
you press ENTER/DEMO in step
9 above. When you press
ENTER/DEMO, the MD recorder enters the track title entry
mode.
• During recording:
Entering a track title
The MD recorder continues recording even after you press
ENTER/DEMO in step
9 above. When you press ENTER/
DEMO, a track title is assigned to the track where you have
started the title entry. If you do not press ENTER/DEMO before
recording ends, the track title assigned will be canceled.
• During CD Synchronized Recording (see page 35):
You can assign the disc title, and 16 track titles one after another
as recording goes on. The track titles you have entered are
automatically assigned to the tracks recorded on the MD in
sequential order. If you enter 17th track title or more, they are
ignored.
If “NO OPERATE!” appears
Operation you have tried to use is not acceptable. For example,
you have tried to use the remote control while entering a title using
the buttons on the unit. Use the buttons on the unit only.
Blanks
Character entry position
Character entry position
EN45-50.CA-MXS6MD[US/UB]/f 00.10.10, 9:51 AM 47