English, Using daily timer – JVC CA-MXS6MD User Manual
Page 57
– 54 –
English
10
Push the joy control rightward ( ) or leftward
( ) to select the recording length mode.
• The recording length mode changes as follows:
11
Press SET.
The timer (
) and REC indicators stop flashing,
and remain lit.
12
Press
to turn off the unit (on standby) if
necessary.
The STANDBY/ON lamp lights red.
Recording Timer will be canceled and the unit will
not turn off automatically in the following.
• When you pause the recording.
• When you change the source after stopping the recording.
• When you enter the timer setting or clock setting mode.
To turn on or off Recording Timer after its setting is
done
1 Press MENU.
2 Push the joy control downward (
) to select “REC
ON/OFF” (highlighted), then press SET.
The Recording Timer On/Off screen appears.
3 To turn off the Recording Timer, push the joy control
downward (
) to select “OFF” (highlighted), then
press SET.
“REC TIMER OFF” appears for a while. The timer
(
) and REC indicators go off from the display.
The Recording Timer is canceled, but the setting for
the Recording Timer remains in memory.
To turn on the Recording Timer, press SET (after
making sure that “ON” is selected (highlighted) in
the main display).
The timer (
) and REC indicators light on the
display. The settings you have done are shown in the
main display for your confirmation.
Continued
SP
(Standard Play)
LP4
(4 Times Long Play)
LP2
(2 Times Long Play)
Using Daily Timer
With Daily Timer, you can wake up to your favorite music
or radio program.
• You can set Daily Timer whether the unit is turned on or
in standby mode.
• To correct a mis-entry any time during the setting
process, press CANCEL.
• To cancel the setting any time during the process, press
MENU.
How Daily Timer actually works
The unit automatically turns on, and starts playing the
specified source when the timer-on time comes. Then,
when the timer-off time comes, the unit automatically turns
off (stands by).
Daily Timer works every day, and the timer settings remain
stored in memory until you reset them or unplug the AC
power cord.
On the unit ONLY:
1
Press MENU.
2
Push the joy control downward (
) to select “REC
ON/OFF” (highlighted).
• If you cannot select “REC ON/OFF,” you have not
finished setting the built-in clock. (See page 52.)
Ex. When the unit is turned on, and the source
is CD (but not playing)
EN51-57.CA-MXS6MD[US/UB]/f
00.10.10, 9:54 AM
54