JVC CA-MXS6MD - Manual (Page 25)

– 22 –
English
Basic CD Operations
While playing a CD, you can do the following operations.
To exchange CDs during playback of another
Press the open/close button (
0 CD1, 0 CD2, or 0 CD3)
corresponding to a disc number not currently being played
to eject that disc tray and exchange the CD.
If CDs are exchanged during playback, playback will stop
after playing all newly inserted CDs.
To stop playback for a moment
Press CD
3 / 8.
To resume play, press CD 3 / 8 again.
To locate a particular point in a track during play
On the remote control:
Press and hold
¡ (¢) or 1 (4).
•
¡ (¢) : Fast-forwards the tracks.
• 1 (4) : Fast-reverses the tracks.
On the unit:
Push the joy control upward (
¡ ) or downward
(
1 ).
• Upward (
¡ ): Fast-forwards the tracks.
• Downward (
1 ) : Fast-reverses the tracks.
To go to another track
On the remote control:
Press
¢ (¡) or 4 (1) repeatedly.
•
¢ (¡) : Skips to the beginning of the next or
succeeding tracks.
•
4 (1) : Goes back to the beginning of the current or
previous tracks.
On the unit:
Push repeatedly (or hold) the joy control rightward
(
¢ ) or leftward (4 ).
• Rightward ( ¢ ) : Skips to the beginning of the next
or succeeding tracks.
• Leftward (
4 ): Goes back to the beginning of the
current or previous tracks.
To go to another track directly using the number
buttons (on the remote control ONLY)
Pressing the number button(s) allows you to start playing
the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
Programing the Playing Order of the Tracks
— Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
On the remote control:
1
Load CDs.
• If the current selected source is not the CD player,
press CD
3 / 8, then 7 before going to the next step.
2
Press PLAY MODE so that “CD PROGRAM”
appears in the main display.
The PRGM indicator also lights.
• Each time you press the button, play mode changes
as follows:
3
Press one of the disc number buttons (CD1, CD2,
and CD3) to select the disc number you want to
play.
4
Press the number buttons to select the track from
the disc selected in the above step.
• For how to use the number buttons, see “To go to
another track directly using the number buttons (on
the remote control ONLY)” to the left.
Program play
(CD PROGRAM)
Random play
(CD RANDOM)
Continuous play
(CD CONT.)
Step No.
Ex. Disc No. 1 is selected
Disc No. and Track No.
Continued
EN20-25.CA-MXS6MD[US/UB]/f 00.10.10, 9:45 AM 22