JVC CA-MXS6MD - Manual (Page 49)

– 46 –
English
Assigning Titles to an MD
You can assign a name to each MD and to each track using
alphabetic characters (uppercase and lowercase), symbols
and numerals. Once a title is assigned, it is displayed for
your confirmation.
• You cannot edit titles composed of more than 61
characters.
About the number of characters inputted for an MD
The total number of characters that can be input for an MD is
1792, and the maximum number that can be input for each
track is 61. (However, the actual number you can input may be
slightly less than this maximum numbers due to the MD
limitations – see page 67.)
• A space can be counted as one character.
• When the stereo long-hour recording (LP2 or LP4: see page
33) method is used for recording, the maximum number you
can input for a track title automatically reduced since "LP:"
and four spaces are automatically added to the beginning of
the track title. Consequently this reduces the total number of
characters you can input for an MD.
Example: You can input up to 10 characters for each track if
an MD is composed of 120 tracks recorded using the stereo
long-hour recording method.
On the unit:
In the following example, the process is explained from the
very first — that is, inserting a disc. If you have already
started recording or playing, start from step 2.
• To exit from the title entry screen any time during the
process, press TITLE/EDIT.
1
Insert an MD you want to edit into the MD loading
slot.
• It takes about 5 seconds for the unit to read the TOC
(Table Of Contents) of the inserted MD. While the
unit is reading it, you cannot go to the next step.
2
Press TITLE/EDIT.
The source is changed to “MD.”
• If you press TITLE/EDIT while recording, track title
entry screen of the current recording track appears in
the main display
= go to step 4.
3
Press SET.
The MD recorder enters one of the following title entry
screen.
Disc
title
1st track
title
2nd track
title
3rd track
title
Last track
title
Ex. While playing track 1
• Disc title entry screen: appears when you press SET
when the MD recorder stops.
• Track title entry screen: appears when you press
SET while playing or pausing.
4
Push the joy control rightward ( ) or leftward ( )
to change the title entry mode.
• Title entry mode changes as follows:
5
Press SET to enter the selected title entry mode.
6
Select the character set you want.
1) Push the joy control horizontally ( / ) and
vertically ( / ) to select “ .”
2) Press SET.
• Each time you press the button, the character sets
change as follows:
Ex. When entering a disc title
Alphabets
Numerals
& Symbols
: Select this to change the
character set.
Continued
EN45-50.CA-MXS6MD[US/UB]/f 00.10.10, 9:51 AM 46