JVC RX-1024VBK - Manual (Page 54)

51
Searching a Disc (Only for the CD player)
Search a disc by its performer:
1. Display the disc information screen by following the procedure on page 50.
2. Press ON SCREEN CONTROL
% / fi to move
to “SEARCH,” then
press SET.
The DISC SEARCH screen appears on the TV.
3. Press ON SCREEN CONTROL
% / fi to move
to “PERFORMER”, then
press SET.
The PERFORMER SEARCH screen appears.
4. Press ON SCREEN CONTROL
% / fi / @ / # to move
in front of the
first character of the performer you want to search, then press SET.
To correct the incorrect entry, press ON SCREEN CONTROL
% / fi
to
move in front of the correct character, then press SET.
To erase the incorrect entry, press ON SCREEN CONTROL
% / fi
to move to
“CANCEL,” then press SET.
5. Press SET again.
Disc search starts, then the SEARCH RESULT screen, showing the performers,
appears.
6. On the SEARCH RESULT screen, you can do the following:
• Changing the indication of the disc information: Press ON SCREEN CONTROL
% / fi to move
to a searched disc, then press
@ / #. Each time you press @ / #,
the disc information alternates between its performer and its disc title.
• Going to the Disc Information screen (see page 50): Press ON SCREEN
CONTROL
% / fi to move
to a searched disc, then press SET.
• Showing unseen disc information (if more than 5 discs are listed as a result of
the search): Press ON SCREEN CONTROL
% / fi to move
to (or ),
then press SET.
• Going back to the PERFORMER SEARCH screen: Press EXIT.
Search a disc by its disc title:
1. Display the disc information screen by following the procedure on page 50.
2. Press ON SCREEN CONTROL
% / fi to move
to “SEARCH,” then
press SET.
The DISC SEARCH screen appears on the TV.
3. Press ON SCREEN CONTROL
% / fi to move
“DISC TITLE”, then
press SET.
The DISC TITLE SEARCH screen appears.
4. Press ON SCREEN CONTROL
% / fi / @ / # to move
in front of the
first character of the disc title you want to search, then press SET.
To correct the incorrect entry, press ON SCREEN CONTROL
% / fi
to
move in front of the correct character, then press SET.
To erase the incorrect entry, press ON SCREEN CONTROL
% / fi
to move to
“CANCEL,” then press SET.
TEXT COMPU LINK Remote Control System
DISC SEARCH screen
PERFORMER SEARCH
screen
SEARCH RESULT screen
DISC SEARCH screen
Note
Symbols such as @, # or $
cannot be available for search.
DISC TITLE SEARCH screen
EN41_55.RX-1024V[J]/1.PM5 98.5.12, 0:34 PM 51