JVC RX-1024VBK - Manual (Page 17)

14
From the remote control:
Press one of the source selecting buttons directly.
DVD Selects the DVD player.
VCR1 Selects the video component connected to the VCR1
jacks.
VCR2 Selects the video component connected to the VCR2
jacks.
VIDEO Selects the video component connected to the
VIDEO jacks.
CD* Selects the CD player.
TAPE/MD* Selects the cassette deck or the MD recorder.
PHONO*
Selects the turntable.
FM* Selects an FM broadcast.
AM* Selects an AM broadcast.
TV/DBS • Selects TV sounds when the remote control selector is set to “AUDIO/
TV/VCR.”
• Selects the DBS tuner when the remote control selector is set to “DBS.”
Selecting different sources for picture and sound
You can watch picture from a video component while listening to sound from another
component.
On the front panel:
1. Press SOUND SELECT briefly while viewing the picture from
a video component such as the VCR or DVD player, etc.
“SOUND SELECT” appears on the display.
2. Turn SOURCE SELECTOR to select the sound (except the TV
sound), while the indication of the above step is still on the
display.
From the remote control:
Press one of the audio source selecting buttons (CD, TAPE/MD, PHONO, FM, AM),
while viewing the picture from a video component such as the VCR or DVD player, etc.
Adjusting the Volume
On the front panel:
To increase the volume, turn MASTER VOLUME clockwise.
To decrease the volume, turn it counterclockwise.
When you turn MASTER VOLUME rapidly, the volume
level also changes rapidly.
When you turn MASTER VOLUME slowly, the volume
level also changes slowly.
From the remote control:
To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME –.
Note:
When you press one of the
source selecting buttons
marked above with an asterisk
(*), the receiver automatically
turns on.
Notes:
• Once you have selected a
video source, pictures of the
selected source is sent to the
TV until you select another
video source.
• When you select TV sound as
the source, this function does
not work.
SOUND SELECT
INPUT ATT.
SOURCE SELECTOR
– +
MASTER VOLUME
CAUTION:
Always set the volume to the
minimum before starting any
source. If the volume is set at its
high level, the sudden blast of
sound energy can permanently
damage your hearing and/or
ruin your speakers.
Note:
The volume level can be
adjusted within the range of “0”
(minimum) to “90” (maximum).
VCR 1 VCR 2 VIDEO
CD TAPE/MD PHONO TV/DBS
AM FM
DVD
VOLUME – +
EN13_22.RX-1024V[J]/1.PM5 98.5.12, 0:18 PM 14