Jensen MP8610BT - Manual (Page 30)

MP8610BT
30
CD Player Operation
Insert and Eject CD
Press the open/eject button (31) and let the motorized front panel swing-down to display the
CD slot. Insert a CD label side up. After inserting a CD, the front panel will close automatically.
To stop CD play and eject the CD, press the eject button. After ejecting the CD, the unit will
close automatically after 10 seconds, or you can close the front panel immediately by pressing
the eject button again.
Pause
Press the PAU button (11) to suspend disc play. Press the PAU button again to resume disc
play.
Track Select
Sequential Selection
Press the left ( ) or right ( ) joystick button (7 or 8) for less than one second to advance to
the next track on the CD. The selected track number will appear on the display.
Fast Forward/Reverse Selection
Press and hold the left ( ) or right ( ) joystick button (7 or 8) for more than one second to fast
forward or fast reverse through the disc. CD play starts when the button is released.
Direct Track Selection
When in CD mode, press the AUDIO button (4) to enter the desired track number directly.
"TRACK __” will flash on the display, allowing you to enter a track number using the number
buttons (0-1). The unit will automatically play the selected track.
Intro Scan (INT)
During disc play, press the INT button (12) to play the first 10 seconds to each track on the
disc. When the desired track is reached, press INT again to end the scan and play the selected
track.
Repeat (RPT)
Press the RPT button (13) during disc play to continuously repeat the track. Press RPT again
to stop repeating.
Random (RDM)
Press the RDM button (14) during disc play to play all tracks on a CD in random, shuffled
order. Press RDM again to stop random play.
Display CD Text
Press the AS/PS button (10) to display any text encoded on the CD (song title, artist, etc.).
MP8610BT
PHONE
AS/PS
MP3/WMA RECEIVER /
PTM
1 11
31
4 2
5
6
30 10
12 13 14 15 16 17 18 19 20 21 22
7
8 25 26
27 28 9 3
MOSFET 72 WATTS
29