beautypg.com

Mp8610bt, Tuner operation – Jensen MP8610BT User Manual

Page 28

background image

MP8610BT

28

MP8610BT

PHONE

AS/PS

MP3/WMA RECEIVER

/

PTM

1

11

31

4

2

5

6

30

10

12 13

14 15 16 17 18 19 20

21 22

7

8

25 26

27

28

9

3

MOSFET 72

WATTS

29

Tuner Operation

Select a Band

Press the BAND button (9) to change between two FM bands and one AM (MW) band. Each
band stores up to ten preset stations.

Tuning

Manual Tuning

Press the left (

) or right (

) joystick button (7 and 8) for more than three seconds to enter

manual tuning mode, then press the left (

) or right (

) joystick buttons momentarily to move

the radio frequency number up or down one step.

Auto Seek Tuning

Press the left (

) or right (

) joystick button (7 and 8) to move to next station automatically.

Direct Entry

When in Radio mode, you can access a radio station frequency directly by pressing and
holding the AUDIO button (4). Use the number keys (1-0) to enter the station frequency and
the unit will automatically tune to the selected frequency.

Preset Stations

Ten numbered preset buttons store and recall stations for each band.

Store a Station

Select a band (if needed), then select a station. Hold a preset button (11-20) for three seconds.
The preset number will appear in the display.

Recall a Station

Select a band (if needed). Press a preset button

(11-20)

to select the corresponding stored

station.

You can also press the AS/PS button (10) to display a list of all stored preset station from
which you can select. Use the up (+) or down (-) joystick buttons to select the preset station,
then press the AUDIO button (4) to confirm your selection.

Automatically Store Stations

Automatically select ten strong stations and store them in the current band. Select a band (if
needed). Press AS/PS (10) for more than three seconds. The new stations replace stations
already stored in that band.

Stereo

The unit will automatically pick up a stereo signal, when available. When in stereo mode, the
ST icon appears in the display. When no stereo signal is available, the unit will automatically
revert to mono operation, and no icon will be displayed.

Tuner Operation / Operación de la Radio / Fonctionnement de la radio