JVC TH-R3 - Manual (Page 85)

Masterpage:Right+
Filename [TH-R1R3EK_10Subsidiary.fm]
Page 81Friday, 8 April 2005 16:00
SUBSIDIARY SETTINGS
81
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AINITIAL SET UPB, then press
ENTER.
3
Press selection keys
to select
ACLOCK
SET B, then press
ENTER for
confirmation.
4
Press selection keys
to select
AYEARB, then
press ENTER. Press
selection keys to set
the year, then press
ENTER.
● Repeat the same procedure to set the date and time.
● When you set the date, press and hold F G to change the date
by 15 days interval.
● When you set the time, press and hold F G to change the time
by 30 minutes interval.
5
Press selection keys to select AJUST CLOCKB, then press
ENTER. Press selection keys to set to the desired mode, then
press ENTER.
● The default setting is AOFFB.
● If you set to AOFFB, you can disregard the next step as you
won’t be able to receive regular clock adjustments.
6
Press selection keys to select ATV PROGRAMMEB, then press
ENTER. Press selection keys to set the channel position to the
number representing the station transmitting clock setting data,
then press ENTER.
● The unit is preset to receive clock setting and adjustment data
from the channel selected in this step (step 6).
7
Press SET UP to start the clock operation.
NOTES:
● Just Clock (when set to AONB) adjusts the unit’s built-in clock
every hour, except for 23:00, 0:00, 1:00 and 2:00.
● Just Clock is not effective when:
^ the unit’s power is on.
^ the unit is in the Timer mode.
^ a difference of more than 3 minutes exists between the built-in
clock’s time and the actual time.
^ the unit is in the Automatic Satellite Programme Recording
mode. (A pg. 53)
^ AL-2 SELECTB is set to ASAT VIDEO/RGBB or ASAT S-VIDEO/
RGB B. (A pg. 69)
● If Just Clock is set to AONB, the unit’s clock is automatically
adjusted at the start/end of Summer Time.
● Just Clock may not function properly depending on the reception
condition.
Just Clock
The Just Clock function provides accurate time keeping through
automatic adjustments at regular intervals, by reading data from a
PDC signal.
The Just Clock option can be set to
AONB or AOFFB at the Clock Set
screen. (The default setting is AOFFB.)
IMPORTANT:
If you turn off Just Clock, the accuracy of your unit’s built-in clock
may be reduced, which could adversely effect timer recording. We
recommend you to keep Just Clock set to
AONB. In cases where the
clock setting data from a PDC signal is incorrect, however, you are
advised to keep Just Clock set to
AOFFB.
Clock Set
IMPORTANT:
If you performed Auto Set Up (A pg. 18) or Preset Download
(A pg. 19), without ever having set the clock previously, the
unit’s built-in clock is also set automatically.
Perform the following steps only if ^
^ Auto Clock Set has not been performed correctly by Auto Set
Up or Preset Download.
OR
^ you want to change Just Clock setting. (See AJust ClockB in
the right column)
● Turn on the unit.
● Turn on the TV and select an input mode such as EXT1.
● Set the remote control selector switch to AUDIO.
● Press DVD on the remote control.
1 2 3
4 5 6
7 8 9
0
VOL
SAT
TV
AUDIO
SET UP
(FGDE)
ENTER
DVD
Selection Keys
DVD SET UP FUNCTION SET UP
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
INITIAL SET UP
AUTO CH SET MANUAL CH SET GUIDE PR CLOCK SET
YEAR
DATE
2005
05/07 SAT
TIME 18:56
JUST CLOCK OFF
TV PROGRAMME 18
EXIT
OK
SELECT
SET UP
TH-R1R3EK_00.book Page 81 Friday, April 8, 2005 4:00 PM