Set stations (a), Set stations (b), Fine-tuning channels already stored – JVC TH-R3 User Manual
Page 84: 80 set stations (a)
SUBSIDIARY SETTINGS
Page 80Friday, 8 April 2005 16:00
Filename [TH-R1R3EK_10Subsidiary.fm]
Masterpage:Left+
80
Set Stations (A)
Set station names that are registered in your unit.
1
Perform steps 1 - 3 of
AManual Channel SetB (A pg. 79).
2
Press selection keys to select the channel you want to modify,
then press ENTER twice. The setting screen appears.
3
Press selection keys to select
AIDB, then press ENTER for
confirmation.
4
Press selection keys to select the desired ID from the
registered station names ID (A pg. 90), then press ENTER.
●
The confirmation screen appears.
5
Press selection keys to select
AOKB, then press ENTER.
6
Press SET UP.
●
Repeat steps 2 - 5 as necessary.
7
Press SET UP or RETURN twice to complete the setting.
Set Stations (B)
Set station names other than the ones registered in your unit.
1
Perform steps 1 - 3 of
AManual Channel SetB (A pg. 79).
2
Press selection keys to select the channel you want to modify,
then press ENTER twice. The setting screen appears.
3
Press selection keys to select
AIDB, then press ENTER twice
for confirmation.
●
The confirmation screen appears.
4
Press selection keys to move the arrow to the character entry
field.
5
Press selection keys to select the desired characters (A–Z, 0–
9, –, Z, +,
& (space)), then press ENTER at the character
entry position.
●
You can enter up to 4 letters.
6
Confirm the arrow is on
AOKB, then press ENTER.
7
Press SET UP to return to the Manual Channel Set screen.
●
Repeat steps 2 - 7 as necessary.
8
Press SET UP or RETURN twice to complete the setting.
NOTE:
The characters available for the station name (ID) are A–Z, 0–9, –,
Z, +,
& (space) (maximum of 4).
Fine-Tuning Channels Already Stored
1
Perform steps 1 - 3 of
AManual Channel SetB (A pg. 79).
2
Press selection keys to select the channel you want to fine-
tune, then press ENTER twice. The setting screen appears.
3
Press selection keys to select
AFINEB.
4
Press
D E until the picture appears in its best quality.
●
Repeat steps 2 - 4 as necessary.
5
Press SET UP to return to the Manual Channel Set screen.
6
Press SET UP or RETURN twice to complete the setting.
1
2
3
4
5
6
7
8
9
0
VOL
SAT
TV
AUDIO
RETURN
SET UP
(FGDE)
ENTER
DVD
Selection Keys
TH-R1R3EK_00.book Page 80 Friday, April 8, 2005 4:00 PM