JVC TH-R3 - Manual (Page 25)

Masterpage:Right+
Filename [TH-R1R3EK_05Name.fm]
Page 21Friday, 8 April 2005 16:00
INITIAL SETTINGS
21
Menu/Audio/Subtitle Language Set
Some DVD discs contain the DVD menu display, audio and
subtitles in multiple languages. With these discs, you can set the
default language as you like.
● The procedure shows how to set AMENU LANGUAGEB as an
example.
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select ADVD SET UPB, then press
ENTER for confirmation.
3
Press selection keys
to select
ALANGUAGE
SET B, then press
ENTER for
confirmation.
4
Press selection keys
to select
AMENU
LANGUAGE B, then
press ENTER for
confirmation.
5
Press selection keys
to select your desired language, then press ENTER.
● See ALanguage Code ListB (A pg. 89).
6
Press SET UP to complete the setting.
NOTE:
When the selected language is not available on the disc, the disc’s
default menu language is played back.
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to
select
AFUNCTION SET
UP B, then press
ENTER.
3
Press selection keys to
select
AVIDEO IN/OUTB,
then press ENTER.
4
Press selection keys to
select
AMONITOR
TYPE B, then press
ENTER.
5
Press selection keys to
select the desired
setting, then press
ENTER.
6
Press SET UP to
complete the setting.
* The boldface settings below indicate the settings at your purchase.
8
MONITOR TYPE ^ 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX
4:3LB (Letter Box conversion):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars appear on
the top and the bottom of the screen.
4:3PS (Pan&Scan):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars do not
appear; however, the left and right edges of the pictures will not be
shown on the screen.
16:9AUTO (Wide television conversion):
Select this when the aspect ratio of your TV is 16:9 (wide TV).
16:9FIX (Wide television conversion):
Select this when the aspect ratio of your TV is fixed to 16:9 (wide
TV). The unit automatically adjusts the screen width of the output
signal correctly when playing back a picture whose aspect ratio is
4:3.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a wide-screen TV
with 16:9 aspect ratio.
Material with this ratio will not fit to a TV with 4:3 aspect ratio.
There are two styles to display the image,
APan&ScanB (PS) and
ALetter BoxB (LB).
Pan&Scan
The right and left side of the image are cut off.
The image fills the screen.
● The picture will be shown in the A4:3LBB mode
depending on the disc even if the A4:3PSB
mode is selected.
Letter Box
Black bands appear at the top and bottom of
the image. The image itself appears in 16:9
aspect ratio.
Language
● Turn on the unit.
● Turn on the TV and select an input mode such as EXT1.
● Set the remote control selector switch to AUDIO.
● Press DVD on the remote control.
1 2 3
4 5 6
7 8 9
0
VOL
SAT
TV
AUDIO
DVD
(FGDE)
ENTER
SET UP
Selection Keys
MENU LANGUAGE
AUDIO LANGUAGE
LANGUAGE SET
ENGLISH
AUDIO OUTPUT UTILITY
SUBTITLE OFF
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
DVD SET UP FUNCTION SET UP INITIAL SET UP
EXIT
OK
SELECT
SET UP
ENGLISH ENGLISH
Monitor Set
● Turn on the unit.
● Turn on the TV and select an input mode such as EXT1.
● Set the remote control selector switch to AUDIO.
● Press DVD on the remote control.
DVD SET UP FUNCTION SET UP INITIAL SET UP
VIDEO IN/OUT RECORDING SET OTHERS
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
MONITOR TYPE
F-1 INPUT
L-1 INPUT
DISPLAY SET
L-1 OUTPUT
L-2 SELECT
4:3LB
VIDEO
VIDEO
SCART VIDEO
S-VIDEO/RGB
EXIT
OK
SELECT
SET UP
DVD SET UP FUNCTION SET UP INITIAL SET UP
VIDEO IN/OUT RECORDING SET OTHERS
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
MONITOR TYPE
F-1 INPUT
L-1 INPUT
DISPLAY SET
L-1 OUTPUT
L-2 SELECT
4:3LB
VIDEO
VIDEO
SCART VIDEO
S-VIDEO/RGB
4:3PS
4:3LB
16:9AUTO
16:9FIX
EXIT
OK
SELECT
SET UP
TH-R1R3EK_00.book Page 21 Friday, April 8, 2005 4:00 PM