JVC XL-R5020BK - Manual (Page 33)

31
Recording from the External Sources—Sound Synchronized Recording
With this recording method, playback and recording start automatically when the playback sound comes into this unit through
the DIGITAL IN terminals, LINE IN jacks or MIC jack.
• Recording can be also stopped automatically when the playback sound stops coming in (see page 33).
• When you purchase this unit, digital recording from MDs, CDs or DATs is set to record the entire discs or tapes. If you want to
record the tracks one by one, see page 34.
IMPORTANT
When using operating buttons (
3, 7, 8) on the remote control, check which indicator lights up on the display—CD PLAYER (3-CD
Changer) or CD RECORDER. If the incorrect indicator is lit, press CONTROL CD or CONTROL CDR to select the correct target source.
1
Load a recordable CD-R or CD-RW onto the CD
Recorder disc tray.
2
Press REC SOURCE SELECTOR on the unit or
REC SOURCE on the remote control to select a
source to record from.
Selected recording source lamp on the unit lights up.
OPTICAL IN :Records through the DIGITAL IN/
OPTICAL terminal (digital recording).
The DIGITAL lamp lights up.
COAXIAL IN :Records through the DIGITAL IN/
COAXIAL terminal (digital recording).
The DIGITAL lamp lights up.
LINE IN :Records through the LINE IN (REC)
jacks (analog recording). The LINE lamp
lights up.
MIC IN :Records through the MIC jack (analog
recording). The MIC lamp lights up.
3
Adjust the recording level if necessary—only for
LINE IN and MIC IN.
See details on page 23.
4
Press SYNCHRO.
The unit enters recording pause mode and the SYNCHRO
indicator lights up on the display. The remaining time of
CD-R or CD-RW is shown on the display.
• If OPC (see page 42) is being performed, “UPDATE
OPC” flashes on the display.
5
Start playback of the selected external component.
Recording starts automatically when the sound comes in.
To stop recording for a moment, press PAUSE 8 for CD
Recorder on the unit or 8 on the remote control. To resume play,
press PLAY 3 for CD Recorder on the unit or 3 on the remote
control. (A track mark is recorded when you resume
recording.)
To stop recording, press STOP 7 for CD Recorder on the
unit or 7 on the remote control.
To eject the disc, press EJECT 0.
“FINALIZE ?” appears on the display.
—To finalize, press FINALIZE or SET. After finalizing, the disc
is ejected.
—Not to finalize, press EJECT 0 again or wait for 5 seconds
so that the disc comes out without being finalized.
To check the current track number during play, press
DISPLAY on the remote control. The current track number
appears for 3 seconds (see page 24).
• If “UNLOCK” appears on the display when selecting “OPTICAL IN”
or “COAXIAL IN,” digital component connected to the DIGITAL IN
terminals is not recognized. Check the connection.
• If Sound Synchronized Recording do not work correctly when “LINE
IN” is selected as recording source, use the Standard Recording
method (see page 22). If the sound signal is too weak for this unit
to detect, Sound Synchronized Recording will not start (or will stop
even while the source is being played).
COMPACT
DIGITAL AUDIO Recordable ReWritable
COMPACT
DIGITAL AUDIO
On the unit: Remote control:
CA NC EL
R EC
SO UR CE
DI SP LA Y ME NU
PLAY
CD REC CD EDIT SYNCHRO FADE
REC PITCH 0
PITCH
FINALIZE
REC MUTING
MODE
SET
GROUP
REPEAT CD CDR
7
10
8 9
10 GROUP
CONTROL
GROUP
1
44.1kHz
AUTO TRACK
L 0 R 3 dB 6 10 15 20 30 40
DIGITAL
CD RECORDER SYNCHRO
CD-R
REC
1
2
3
Currently recorded track numbers of CDR
CD-R or CD-RW
remaining time Signal type
(analog or digital)
EJECT 0
¶ REC/
REC MUTING
¶ REC/
REC MUTING
STOP 7
7
Recording
source lamps PLAY 3
PAUSE 8
8
3
SYNCHRO
CD Recorder
disc tray
REC SOURCE
SELECTOR
REC SOURCE
SYNCHRO
REC
LEVEL
+/−
DISPLAY