JVC XL-R5020BK - Manual (Page 10)

8
To connect digital components
This unit is equipped with two types of digital input/output
terminals—coaxial and optical.
When connecting a digital component equipped with a
digital output terminal
The following connection allows you to perform digital-to-
digital recording on this unit (through the digital terminals).
• When playing back an MP3 disc, digital signal cannot be output
from this unit. Connect also this unit to LINE OUT (PLAY) jacks by
using audio cords with RCA pin plugs (supplied).
• Digital signal cannot be output through the DIGITAL OUT terminals
while recording digitally from an external component.
When connecting a digital component equipped with a
digital input terminal
The following connection allows you to perform digital-to-
digital recording (from 3-CD Changer onto the other
component).
When this unit cannot recognize a component connected to the
DIGITAL IN COAXIAL or OPTICAL terminal, “UNLOCK” appears on
the display. If this happens, press PLAY
3 for 3-CD Changer so that
the connected component will be recognized.
To a wall outlet
To coaxial
digital output To optical
digital output
Audio component with
digital input
To optical
digital input
LINK-4
CHRO) DIGITAL IN
COAXIAL OPTICAL
DIGITAL OUT
COAXIAL OPTICAL
CDR TD
MODE
COMPU LINK-4
(SYNCHRO) DIGITAL IN
COAXIAL OPTICAL
DIGITAL OUT
COAXIAL OPTICAL
Before connecting
digital optical cable,
remove the protective
cover from the terminal.
Protective plug
Digital coaxial
cable
(not supplied)
Audio component with
digital output
Digital optical
cable
(not supplied)
NOW, you can plug in the unit and other connected
components FINALLY!
CDR TD
MODE
COMPU LINK-4
(SYNCHRO) DIGITAL IN
COAXIAL OPTICAL
DIGITAL OUT
COAXIAL OPTICAL
To coaxial
digital input
Before connecting
digital optical cable,
remove the protective
cover from the terminal.
Protective plug
Digital coaxial
cable
(not supplied) Digital optical
cable
(not supplied)
01-17.XL-R5020BK_f 02.5.30, 5:12 PM 8